2014年3月12日星期三

The Ways to Protect Refractories and Improve Service Life of Lalde

The MgO in slag is eroded usually by furnace lining while making steel. In the process of smelting, the slag and refractory materials will get touched; MgO concentration in slag should almost reach saturation. There is a close relationship between the content of saturated MgO and CaO/SiO2. For slag with low alkalinity (CaO/SiO2<2.0), the higher the proportion of FeO is, the lower proportion of saturated MgO. When FeO content is low and saturated MgO content is high, the slag will erode more refractories. While for slag with high alkalinity (CaO/SiO>2.0), the saturated MgO content will not be seriously affected by the FeO content, whats more the slag will not erode much more refractories. Therefore, improve slag alkalinity can strongly protect refractories.
The service life of ladle is directly influenced by refining time, so it is important to improve steelmaking technology so that to shorten smelting time.
     The service life of ladle will be reduced by 3 -5 heats once shut down, so to achieve efficient production, the key is shortening smelting cycle. On the premise of using advanced technology to guarantee the best steel quality and the lowest total consumption, shorten the smelting cycle to the minimum, improve equipment and shorten shut down time.

没有评论:

发表评论

Refractory Material, Fire Bricks, Refractory Manufacturer, China Refractory - CX Refractories

Refractory Material, Fire Bricks, Refractory Manufacturer, China Refractory - CX Refractories