Analysis on Performance Requirement of Refractory material in Heat Treatment Furnace

The qualified of anchor brick is similar to the material of furnace lining castables and formed by preeing and being fired at high temperature. Characterized by good thermal shock resistance and high strength, it is used for several heating furnace and has good effect.

Refractory: Any material capable of resisting high temperatures and capable of withstanding high temperature physical and chemical effects.
Heat treatment furnace refractory material performance requirements:
1 has sufficient refractoriness. Refers to the refractory material after heating to a certain degree of softening temperature, but not its melting point.
According to the level of refractoriness, ladle refractory can be divided into ordinary refractories (refractory degree of 1580 ~ 1700 ℃), advanced refractories (refractory degree of 1770 ~ 2000 ℃) and special refractories (refractoriness greater than 2000 ℃).
2 has a certain high temperature structural strength. The structural strength at high temperature is evaluated by the softening point of the load, and the softening point of the load is the pattern
(The size of φ36 * 50mm) under a certain pressure (0.2MPa) conditions, a certain heating rate of heating, measured the sample began to deformation (deformation of the original sample 0.6%) temperature, the temperature is called refractory castable Of the load softening point starting point.
3 high temperature chemical stability.
4 has good resistance to abrupt heat.
5 volume stability at high temperatures.