Submerged Entry Nozzle---Refractory Nozzle

Submerged entry nozzle enjoys performances of purifying liquid steel, prevent liquid steel oxidation, with good liquid steel washing resistance and erosion resistance.

Submerged Entry Nozzle

Introduction

Changxing Refractory's submerged entry nozzle is isostatically pressed from alumina-graphite with zirconia inserts and magnesia seats as required. Argon channels are also available. These pieces are 100% X-ray tested for flaws and cracks prior to shipment. These submerged entry nozzles are engineered to provide maximum life at minimal cost.
Advantages

1. The Submerged Entry Nozzle (SEN) and Submerged Entry Shroud (SES) protect the steel flow from the Tundish to the mould.
2. Submerged Entry Nozzle is fixed inside the Tundish and also functions as a Tundish Nozzle. Submerged Entry Shroud on the other hand is fitted from the outside on the Tundish Nozzle.
3. The body is made of Alumina Carbon quality while the seat and slag zone are made of different qualities as per customer requirements including Zirconiz-Carbon and Magnesia Carbon quality.
4. The SEN and the SES are protected from the outside with a ceramic paper lining.
5. Submerged entry nozzle is served to protect and control the molten steel stream between the tundish and the mould during casting.
Application

Submerged entry nozzle enjoys performances of purifying liquid steel, prevent liquid steel oxidation, with good liquid steel washing resistance and erosion resistance.

Content source:
http://www.yilongrefractory.com/ProductServletOne?id1=3&id=51

Modulation principle of slurry used for refractory brick

Light Weight Mullite Insulation Brick can be widely used as lining or insulation layers of various industrial furnaces and kilns in metallurgical industry, machine building industry, ceramic industry, chemical industry.

Brickwork with refractory slurry should follow the following principles:
    (1) to deal with all kinds of refractory slurry pre experiment and pre laying brick front, confirm the bonding time, different mud initial setting time, consistency and water;
    (2) Modulation of different mud to use different instruments, and timely cleaning;
    (3) Modulation is not homogeneous slurry to use clean water, water should be accurate weighing, blending uniformly, adjusted with the use. Have good hydraulicity and modulation of hard mud shall not add water use, has the initial setting of mud may not continue to use the;
    (4) Modulation with phosphate mud to ensure refractory material time trapped provisions, with the use of post set, well modulated mud arbitrarily diluted with water. This kind of mud for corrosive shall not be in direct contact with the metal shell.
    We take the zero defect management idea, through the refractory production process from beginning to end. All the time since, in the pursuit of perfect quality at the same time, also constantly improve the service system, concerned about each of your needs, to provide professional sales and technical service for you.

http://www.yilongrefractory.com/news/Modulation%20principle%20of%20slurry%20used%20for%20refractory%20brick.html

Requirements of Refractory Materials During Blast Furnace Lining Repair

Composed of high temperature electric sintered anthracite and graphite with additives, the products are mainly used for filling the gap between carbon blocks and cooling devices through cold ramming process, and also for the gaps between carbon blocks and between carbon blocks and refractor bricks.

Generally speaking, there are several blast furnace lining maintenance methods including grouting for lining making, cold spray technology, digging hole on furnace shell technology and remote control spray technology.


Grouting for lining technology can be widely applied to hot point short-term repair of blast furnace stack and furnace bosh. It is a means of prolonging furnace life, but it must be repaired repeatedly to keep the lining at a certain thickness. Different furnace parts use different refractory material, the mud consistency is a key element for the success of grouting for lining technology.


Using cold spray technology not only can make blast furnace cleaned thoroughly, but also can firmly bond old and new firebrick refractory and then lead to a good furnace lining form and make the first run of the blast furnace successful. While, repairing blast furnace in cold spray technology needs too much time, it is a limited element for its widely using.


Digging hole on furnace shell and gunning damaged parts with long gun technology is usually applied to damaged furnace lining and shell technology, it uses a long gun to spray and repair the inside damaged parts from outside. This method has the advantages of speed spraying and short wind time, but it is only suitable for partial damage.


Remote control gunning technology is an advanced technology which is now being developed and used in China and many other countries in recent years. Its gunning time is short and its gunning range is large, but it needs complex technology. 


In a word, grouting for lining technology requires appropriate refractories mud consistency; the other three repair technologies require good refractory adhesion under high temperature and normal temperature so that to make spraying coating in a certain thickness continuously, and the coating is tightly bonded into a no pull-off and dense formation which can be dried and warmed fast.